Technical parameters and configuration list of Baoerfu powered air purifying respirator (model: PRF-103RM3)
Prf-103rm3 consists of main engine, breathing tube and head hood.
Host waterproof design, stand up to rigorous cleaning and disinfection, can spray disinfection, splash, can use at the same time 2-3 particulate and gas filter, filter is installed outside the body, replacement of filter is convenient, lithium-ion battery pack inside the machine installation, operation accessibility, charging hole is outside the body, the charging is convenient, also can take out the battery, replace the battery pack is convenient, the host has power on display LCD screen, battery percentage and quantity, at the same time, according to can observe the battery power consumption, and low battery alarm function, the host has air volume on the adjusting knob, step-less adjustable speed, large clockwise and anticlockwise down, Equipped with flow meter to detect air volume .When the battery is full, the respirator can work continuously for 6-20 hours (the maximum air volume can supply power continuously for more than 6 hours, and the minimum air volume can supply power continuously for 20 hours).CE certification, CE EN12941. EN12942.
Battery: like Novel Coronavirus Protective Equipment
For high-risk aerosol generation procedures, wear PAPR (or tight goggles and n-95 respirator). These ventilators are also in line with the CDC guidelines for TB prevention and control.
What is PAPR?
The device is battery powered and consists of half or full panel, breathing tube, battery driven blower and particulate filter (HEPA only).
PAPR uses blowers to pass contaminated air through HEPA filters, which remove contaminants and provide purified air to the panel.
PAPR is not a real positive pressure device because it can over breathe when inhaled.
The mask can also be used with a half mask PAPR respirator to prevent body fluids from entering.